35
Dosing:
Pre-cleaning
Mapping
Starting the system
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
Notice:
An automatic dosage (IntelliDose) is inte-
grated into this machine. You can find out
how to exactly operate the IntelliDose in
the corresponding instructions of use.
Notice:
Diversey recommends a sustainable work-
ing by determination of the correct product
dosing quantity. Overdosing or underdos-
ing will lead to unsatisfactory cleaning re-
sults.
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
-
tating tool, and thereby cause injuries to
people and damage to the environment.
Notice:
You can find the exact details and descrip-
tions in the mapping handbook.
• Switch the machine on. Hold down the main switch button
for two seconds.
Notice:
It takes approximately 2 minutes for the
machine to fully power up
• Touch the LOG IN button.
• Enter your operator code and touch
OK.
• The Prep Step Guide will appear.
• Move to the Home Screen by touch-
ing OK.
• To access the Functions screen,
touch the right arrow.
EN
To Next Page
Loading...
Need help?
General
