18
D760M
-
-
GATE 1 WINGS - DIP SWITCH # 4 in OFF (Soft-Stop function disabled):
Notice:
- during the SETUP procedure the safety devices are disabled.
- STOP input will stop the programming at any time. The programming mode remains active
and can be re-started from point 1
- while DL7 blinks, press and hold down for at least 5 seconds P1 and P2 buttons to kill exit
programming mode
- set a working time slightly longer than necessary (a couple of seconds) to allow complete
opening/closing of the leaves.
DIP SWITCH
1
AUTOMATIC
CLOSING
On
Off
2 2 / 4 STROKE
On
-
3
Off
in the same conditions, the same command sequence causes the
3 NO REVERSE
On
NO RE-
VERSE)
Off
4 DECELERATION
On
the deceleration function is on -
TIONS”)
Off
5 PRE-FLASHING
On
Off
6 FOTOTEST
On
Off
ENGLISH
To Next Page
Loading...
