5
Models 150, 152, 162, 168
Introduction
Model 152 Specifications
Freezing Cylinder
One, 1.5 quart (1.4 liter).
Mix Hopper
One, 8 quart (7.6 liter).
Beater Motor
One, 0.5 hp.
Refrigeratio n Unit
One, approximately 3,000 btu/hr. compressor .
Refrigerant: R404A.
One, independent SHR compressor, approximately
400 btu/hr. R134a. (BTU’s may vary based on
compressor used.)
Electrical
Electrical
Total
Amps
Supplied With
115/60/1 Air 14.8 20 amp. cord and plug
208-230/60/1 Air 7.4 15 amp. cord and plug
This unit is manufactured in other electrical
characteristics. Refer to the Distributor Data Book for
availability. (For exact electrical information, always
refer to the data label of the unit.)
Air Cooled
Clearance: 6” (15.2 cm.) on both sides. Install the skirt
provided on theright sideof theunit andplace theback
of the unit against a wall to prevent recirculation of
warm air .
Dimensions
Width: 16-5/16” (41.8 cm.)
Depth: 27-1/2” (69.9 cm.)
Height: 28” (71.1 cm.)
Counter Clearance: 4” (10.2. cm.) mounted on
standard legs.
Approximate Weights
Net: 201 lbs. (91.2 kgs.)
Crated: Cardboard -- 241 lbs. (109.3 kgs.)
14.5 cu. ft. (.40 cu. m.)
Crated: Wood -- 262 lbs. (118.8 kgs.)
20.0 cu. ft. (.56 cu. m.)
To Next Page
Loading...
Need help?
General
