7-2
OPERATOR’S CHECKLIST
Model 432
Operator’s Checklist
7
Winter Storage
If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is to be left
unheated and subject to freezing conditions.
Disconnect the freezer from the main power source to
prevent possible electrical damage. Your local Taylor
distributor can perform this service for you.
Wrap detachable parts of the freezer such as beater,
blades, drive shaft, and freezer door, and place in a
protected dry place. Rubber trim parts and gaskets can
be protected by wrapping with moisture-proof paper. All
parts should be thoroughly cleaned of dried mix or
lubrication accumulations, which attract mice and other
vermin.
To Next Page
Loading...
