EasyManua.ls Logo

Taylor 430 Service Manual

Taylor 430
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE
MANUAL
Model 430
Shake/Slush Freezer
Original Service Instructions
051430S 2/98 (Original Publication)
(Updated 10/5/15)
Question and Answer IconNeed help?

Do you have a question about the Taylor 430 and is the answer not in the manual?

Taylor 430 Specifications

General IconGeneral
WeightUnknown
Freezing CapacityUnknown
Production CapacityUnknown
Mix Hopper CapacityUnknown
DimensionsUnknown
ElectricalUnknown
CapacityUnknown
Temperature RangeUnknown
Defrost TypeUnknown
Power SourceUnknown
Dimensions (H x W x D)59.5" (1511 mm) x 21" (534 mm) x 31.5" (800 mm)

Summary

Section 1: Introduction

Safety

Safety precautions and guidelines for operating and servicing the equipment.

Model 430 Specifications

Technical details of the Model 430 freezer, including dimensions and electrical specifications.

Running Specifications

Operational parameters like expansion valve setting, low side pressure, and head pressures.

General Installation Instructions

Instructions for proper installation, site preparation, and installer safety precautions.

Electrical Connections

Guidelines for connecting the unit to the power supply, adhering to electrical codes.

Environmental Notices

Information regarding refrigerant use and disposal, and noise level specifications.

Section 2: Systems and Controls

Refrigeration System

Diagram and explanation of the Model 430's refrigeration system components and operation.

Torque Control System

Explanation of the torque control system, its operation, and key components.

Torque Control Features

Mix low/out indicators, protection fuse, lockout mode, and ready light functionality.

Thermistor Control System

Details on how the thermistor control maintains freezing cylinder temperature and service tips.

Thermistor Curve Chart

Chart correlating temperature, Celsius, and resistance (K OHM) for thermistor probes.

Mix Level Control System

Explanation of the mix level control system and its diagram for thermistor units.

Section 3: Troubleshooting

General Troubleshooting Guide

Common problems and their probable causes and remedies for the Model 430 freezer.

Electrical Troubleshooting Guide

Troubleshooting electrical paths for component operation in Torque and Thermistor control units.

Troubleshooting Torque Components

Identifying and troubleshooting issues with torque control system components.

Troubleshooting Thermistor Components

Step-by-step guide to troubleshoot thermistor control system components.

Section 4: Parts

Parts Warranty Explanation

Details on warranty coverage for different parts and compressor warranty disclaimer.

Operator Parts Identification

Diagram and list identifying individual parts of the freezer for operator reference.

Model 430 Exploded View

Diagram illustrating the assembly of the Model 430 freezer with numbered parts.

Door Assembly Exploded View

Detailed exploded view and parts list for the freezer's door assembly.

Control Box Exploded View

Exploded view and parts list for the control box components.

Draw Switch Assembly Exploded View

Exploded view and parts list for the draw switch assembly.

Torque Switch Assembly Exploded View

Exploded view and parts list for the torque switch assembly.

Accessories

List and diagrams of available accessories for the Model 430 freezer.

Torque Model Parts List

Comprehensive list of parts for the Model 430 Torque version.

Thermistor Model Parts List

Comprehensive list of parts for the Model 430 Thermistor version.

Related product manuals