EasyManua.ls Logo

Taylor 62 User Manual

Taylor 62
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S
MANUAL
Model 60 and 62
Shake Freezers
Original Operating Instructions
051059-M
4/00 (Original Publication)
(Updated 3/27/2020)
Question and Answer IconNeed help?

Do you have a question about the Taylor 62 and is the answer not in the manual?

Taylor 62 Specifications

General IconGeneral
BrandTaylor
Model62
CategoryFreezer
LanguageEnglish

Summary

Section 1: To the Installer

Installation Personnel Safety

Safety precautions for installation personnel and adherence to local codes.

Electrical Connection Guidelines

Instructions for proper electrical hookup, grounding, and safety.

Refrigerant Handling Safety

Precautions and information regarding the use and handling of refrigerants.

Beater Rotation Verification

Instructions for checking and correcting beater rotation direction.

Section 2: To the Operator

Compressor Warranty Disclaimer

Explanation of warranty limitations for the refrigeration compressor.

Section 3: Safety

General Safety Warnings and Precautions

Critical warnings about severe injury, death, damage, and operational hazards.

Section 4: Operator Parts Identification

Model 60 Parts Identification

Diagram and list of parts for the Model 60 freezer.

Model 62 Parts Identification

Diagram and list of parts for the Model 62 freezer.

Section 5: User Interface

Section 6: Operating Procedures

Freezer Assembly Procedure

Step-by-step guide for assembling the freezer parts.

Machine Sanitizing Process

Procedures for cleaning and sanitizing the machine.

Priming the Freezer

Steps to prepare the freezer for operation after cleaning.

Syrup System Setup and Calibration

Procedures for filling and calibrating the syrup system.

Section 8: Troubleshooting Guide

Troubleshooting: No Product Dispensed

Common causes and remedies for the machine not dispensing product.

Troubleshooting: Product Too Stiff

Causes and remedies for the product being too stiff.

Troubleshooting: Product Too Soft

Causes and remedies for the product being too soft.

Section 10: Limited Warranty on Equipment

Section 11: Limited Warranty on Parts

Related product manuals