Taylor C602 - Control Panel Functions

10
Systems, Controls and Operations
Model C602
Control Panel Functions
Figure 3
ITEM
DESCRIPTION FUNCTION
1 Keypad-Shake Used for selecting operating functions on the shake side of the machine.
2 Display-Vacuum
Fluorescent Menu (VFD)
Screen which displays menu options and notifies operator if a fault is
detected.
3 Keypad-Menu (Entry/Exit) Used to select the Manager or Service Menu or to exit the Menu Display.
4 Keypad-Soft Serve Used for selecting operating functions on the soft serve side of the
machine.
5 Standby-Soft Serve Indicates when the soft serve side is in the Standby mode.
6 Standby-Shake Indicates when the shake side is in the Standby mode.
7 Keypad-Topping Heater Used to activate the topping rail heaters.
8 Display-LED Dual (Brush
Clean Countdown)
Displays the number of days before brush cleaning is required.
9 Keypad-Flavor Select Used for selecting the desired shake flavor to be dispensed. Also used
for opening and closing the draw valve when cleaning, sanitizing, and
priming the shake side.
10 Switch- Power When placed in the ON position, allows control panel operation.
11 Keypad-Calibrate Menu Used to access the Calibrate Menu containing options for calibrating the
syrup dispensing rate or priming and flushing the syrup lines.
12 Indicator Light-Mix Low Illuminates when the mix hopper has a low supply of mix and should be
refilled as soon as possible.
13 Indicator Light-Mix Out Illuminates when the mix hopper has an insufficient supply of mix to
operate the freezer. The Auto mode will be locked out and the machine
will be placed in the Standby mode.