17
Model C602
Systems, Controls and Operations
Service Menu
The Service Menu option allows a trained service
technician to access and modify critical operating
parameters for the machine. All the menu screens
found in the Manager’s Menu are also included in
the Service Menu. To access the menu, touch the
center of the CONE symbol.
13117
Figure 22
The shake AUTO symbol
, the OPTIONAL
FLAVOR symbol
and the CONE symbol will
be illuminated when the ACCESS CODE screen is
displayed.
In the Menu program, the shake side AUTO symbol
, OPTIONAL FLAVOR symbol , and
CALIBRATION symbol
will function as menu
keys.
AUTO
- increases the value above the cursor
and used to scroll upward in text displays
OPTIONAL FLAVOR
- decreases the value
above the cursor and used to scroll downward in text
displays.
CALIBRATION
- advances the cursor position to
the right and is used to select menu options.
Note: You will not be able to dispense shakes while
accessing the Service Menu options, except when
the CURRENT CONDITIONS screen is displayed.
The soft serve side will continue operation in the
mode it was in when the Menu was selected.
However, the soft serve side control keys will not be
illuminated and are non-functional when a menu
screen is displayed. The control keys for both sides
are only functional when the CURRENT
CONDITIONS screen is displayed.
Entering Access Code
With the ACCESS CODE screen on the display use
the AUTO
or OPTIONAL FLAVOR symbols
to set the first code number in the cursor position.
When the correct number is selected, touch the
CALIBRATION symbol
to move the cursor to the
next number position.
The access code for the Service Menu is 5231.
The access code for the Manager Menu is 8309.
(See Figure 23.)
ENTER ACCESS CODE
5231
_
Figure 23
Continue to enter the proper access code numbers
until all four numbers are displayed, and then touch
the CALIBRATION symbol
. The Service Menu
list will display on the screen, provided the correct
access code is entered.
If an incorrect number is entered for the access
code, the display will exit the Menu program when
the CALIBRATION symbol
is selected. (See
Figure 24.)
13118
Figure 24
To Next Page
Loading...
