25
Model C602
Systems, Controls and Operations
040608
SYSTEM INFORMATION
The SYST EM INFORMATION is displayed on three
separate screens. The first screen contains the
control and software version installed in the
machine. (See Figure 48.)
SOFT WARE VERSION
SERIES C600 CONTROL UVC
VERSION 1.02
> Next
Figure 48
Select the CALIBRATION symbol
to advance to
the next system information screen containing the
software language version. (See Figure 27.)
Language
v1.12r00 English 568
> Next
Figure 49
Select the CALIBRATION symbol
to advance to
the third system information screen containing the
model bill of material and machine serial number.
Selecting the CALIBRATION symbol
again will
return to the Menu list. (See Figure 50)
B.O.M. C600000000
S/N K0000000
> Next
Figure 50
CURRENT CONDITIONS
The CURRENT CONDITIONS screen provides the
viscosity readings for the product when the side is
running and hopper and barrel temperatures for both
sides of the machine. The left column displays the
readings for the shake side and the right column
displays the soft serve side readings. The bottom
line in the display indicates the current glycol
temperature. (See Figure 51.)
VISC 0 0.0
HOPPER 41.0 41.0
BARREL 41.0 41.0
GLYCOL 41.0
Figure 51
CURRENT CONDITIONS is the only Menu screen
that will return the left and right side control panel
keys to normal operation. The Menu keys will not be
illuminated when this option is selected so shakes
can be dispensed and all panel touch keys are fully
functional. Use this screen when you wish to remain
in the Menu and dispense a shake. Exit the
CURRENT CONDITIONS screen and return to the
Menu by selecting the CALIBRATION symbol
.
Note: All screens from this point forward can only
be accessed through the service menu.
TEMPERATURE SCALE
The T EMPERAT URE SCALE option allows the
service technician to choose the scale in which the
machine will display all temperatures. (See
Figure 52.)
TEMPERATURE SCALE
FAHRENHEIT
> Fahrenheit
Celsius
Figure 52
To change the scale setting, use the AUTO
symbol
or OPTIONAL FLAVOR symbol to
move the cursor along side of the desired
temperature scale then touch the CALIBRATION
symbol
to save the selection and return to the
service menu.
To Next Page
Loading...
