Taylor C706 - Model C706 Parts and Diagrams

Section 9
9-1
Model C706
Parts Replacement Schedule
9
Parts Replacement Schedule
Table 9-1
Part Description Every 3 Months Every 6 Months Annually
Drive Shaft Seal X
Scraper Blade X
Freezer Door Gasket X
Front Bearing X
Beater Shoes X
Draw Valve O-ring X
Prime Plug O-ring X
Feed Tube O-ring X
Air Orifice O-ring X
White Bristle Brush, 3 in. x 7 in. Inspect and replace if necessary. Minimum
White Bristle Brush, 1 in. x 2 in. Inspect and replace if necessary. Minimum
Black Bristle Brush, 1 in. x 2 in. Inspect and replace if necessary. Minimum
Double-Ended Brush Inspect and replace if necessary. Minimum
White Bristle Brush, 1/2 in. x 1/2 in. Inspect and replace if necessary. Minimum
White Bristle Brush, 3/16 in. x 1 in. Inspect and replace if necessary. Minimum
White Bristle Brush, 3 in. x 1/2 in. Inspect and replace if necessary. Minimum