Taylor C707 User Manual

7
Model C707 Operator Parts Identification
140618
Section 4 Operator Parts Identification
Model C707
ITEM DESCRIPTION PART NO.
1 KIT A.- COVER- HOPPER X65368
2 PAN - DRIP 11- 5/8 LONG 027503
3 PIN- RETAINING- HOPPER CVR 043934
4 PANEL - SIDE- LEFT 066722- SP3
5 STUD- NOSE CONE 055987
6 SHIELD- SPLASH 049203
7 TRAY - DRIP 056858
8 PANEL- FRONT - LOWER 058942
9 PANEL A.- FRONT- UPPER X58950
ITEM DESCRIPTION PART NO.
10 PANEL A. - SIDE- RIGHT X64151
11 PANEL - REAR 056077- SP1
12 ORIFICE 022465- 100
13 O- RING- 3/8 OD X .070 W
(100 TO BAG)
016137
14 TUBE A.- FEED- SS - 5/32 DIA X29429- 2
15 O- RING- .643 OD X .077 W
(50 TO BAG)
018572
16 GUARD- FAN 028534- 1
17 DUCT A. (OPTIONAL) X56241

Taylor C707 Specifications

General

Power	208-230V, 60Hz, 1Ph
Minimum Clearance	6" on both sides
Water Inlet	3/8" FPT (Water Cooled)
Water Outlet	3/8" FPT (Water Cooled)
Separate Hopper Refrigeration	Maintains mix below 41ºF (5ºC) during Auto and Standby modes.