Taylor C716 - Parts Replacement Schedule

52
Models C708 & C716Parts Replacement Schedule
Section 9 Parts Replacement Schedule
PART DESCRIPTION EVERY 3 MONTHS EVERY 6 MONTHS ANNUALLY
Scraper Blade X
Drive Shaft Seal X
Freezer Door Gasket X
Front Bearing X
Front Beater Shoes X
Draw Valve O-Ring X
Mix Feed Tube O-Ring X
Pump O-Ring X
Pump Valve Gasket X
Mix Feed Tube Check Ring X
Pump Drive Shaft O-Ring X
White Bristle Brush, 3” x 7” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 3” x 1/2” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 1-1/2” x 3” Inspect & Replace
if Necessary
Minimum
White Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum
Black Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum
Double-Ended Brush Inspect & Replace
if Necessary
Minimum
Yellow Bristle Brush Inspect & Replace
if Necessary
Minimum
Brush Set (3) Inspect & Replace
if Necessary
Minimum