Taylor C717 Operator's Manual

USER INTERFACE
5-9
Models C709 & C717
User Interface
5
Manager’s Menu Options
With the ACCESS CODE screen on the display, use the
SEL key to set the first code number in the cursor
position. When the correct number is selected, press the
SEL key to move the cursor to the next number position.
Continue to enter the proper access code numbers
(8309) until all four numbers are displayed, then press
the SEL key. The Manager's Menu list appears on the
screen if correct access code is entered.
If an incorrect number is entered for the access code, the
display exits the Manager’s Menu when the SEL key is
selected.
Figure 5-5
Menu Options
Press the arrow keys to move up or down through the
menu. Select a menu option by pressing the SEL key.
Exit the menu by selecting EXIT FROM MENU, or press
the cone key
.
The following menu options are listed in the Manager's
Menu.
• EXIT FROM MENU
• SERVINGS COUNTER
• SET CLOCK
• AUTO HEAT TIME
•AUTO START TIME
• AUTO STANDBY TIME
• AGITATOR OPERATION
• MIX LEVEL AUDIBLE
• FAULT DESCRIPTION
• FAULT HISTORY
• LOCKOUT HISTORY
• HEAT CYCLE SUMMARY
• HEAT CYCLE DATA
• SYSTEM INFORMATION
• CURRENT CONDITIONS
•ENABLE WIFI
Selecting EXIT FROM MENU exits the Manager's Menu
and returns the control panel keys to normal operation.
Use the SERVINGS COUNTER option to check or reset
the number of servings dispensed from the machine. The
screen automatically resets to zero when the machine is
brush-cleaned.
Reset the SERVINGS COUNTER by selecting the SEL
key to advance to the next screen. Select the Up arrow to
move the arrow (>) to "Yes" and press the SEL key. The
servings counter resets to zero and exits back to the
Manager’s Menu.
The SET CLOCK option allows you to adjust the control
clock date and time. The date and time may only be
changed after the freezer has been manually cleaned,
but before it has been placed in the Auto or Standby
mode. The following message appears if the SET
CLOCK option is selected when the machine is not in a
brush-clean state.
ENTER ACCESS CODE
83 0 9
__
13399BR
SERVINGS COUNTER
DRAWS 0
> Next
RESET COUNTERS
ARE YOU SURE?
Yes
>No
SET CLOCK
12:01 6/10/2010
NO CHANGES ALLOWED
Press Any Key

Taylor C717 Specifications

General

Brand	Taylor
Model	C717
Category	Freezer
Language	English