25
13. Choose Grill Mode (See page 31 for more
information.) or AM/PM Toggle. See Figure 24.
Figure 24
14. Choose AM, PM or ALL DAY. See Figure 25.
Figure 25
Installing Lower Release Sheets
(Grills Using Lower Release Sheets)
Note: The following steps pertain to grill markets using
lower release sheets, only. If lower release sheets are
not used, please disregard this procedure.
WARNING! Upper release sheets cannot be
used on the lower grill surface. Poor quality and
potential food safety issues will occur.
1. Put on heat-resistant gloves. See Figure 26.
Figure 26
2. Clean the grill with a sanitizer-soaked grill cloth to
remove any debris on the grill. See Figure 27.
Figure 27
3. Using a sundae spoon, distribute two level
spoonfuls of soy adhesion flakes over one warm 12
inch (305 mm) cook zone, and allow the flakes to
melt. See Figure 28.
Figure 28
To Next Page
Loading...
Need help?
General
