47
8. Wipe the exposed surface of the release sheets
with a clean, sanitizer-soaked grill cloth.
See Figure 116.
Figure 116
9. Spray a clean sanitizer-soaked grill cloth with one
spray of grill cleaner. See Figure 117.
Figure 117
10. Use the sanitizer-soaked grill cloth to wipe clean
the exposed surfaces of the upper release sheets
including the sides. Repeat the cleaning for the
lower release sheets. See Figure 118.
Figure 118
11. Rinse the upper release sheets with a separate
sanitizer-soaked grill cloth. Wipe until the grill
cleaner residue has been fully removed. See Figure
119.
Figure 119
12. Remove the release sheet locking clips and the
upper release sheets. Wash and rinse the clips in
the 3-compartment sink. If necessary, soak them in
a hot solution of SolidSense APSC to remove
carbon accumulation. See Figure 120.
Figure 120
13. Place all of the release sheets clean side down flat
on the release sheet storage tray. See Figure 122.
Figure 121
To Next Page
Loading...
Need help?
General
