Need help?Do you have a question about the TBB Projecta PMDC-30 and is the answer not in the manual?
General| Model | PMDC-30 |
|---|---|
| Category | Battery Charger |
| Output Current | 30A |
| Cooling | Fan Cooled |
| Output Voltage | 12V DC |
| Battery Type | AGM, Gel |
| Protection Features | Short Circuit, Reverse Polarity |
| Charging Stages | 7-stage charging |
Overview of the PMDC-30 DC-DC charger and its integration with Intelli-Jay.
Diagram illustrating PMDC-30 components and its charging efficiency up to 96%.
Explains the microprocessor-controlled charging algorithm for optimal battery charging.
How battery temperature affects charging and the compensation mechanism.
Curve showing output power reduction due to increasing ambient temperature.
Details the external views and physical dimensions of the PMDC-30 unit.
Identifies and describes the purpose of each connector and terminal on the PMDC-30.
Explains the meaning of the LED indicators (Power, Alternator, Charge, Fault).
Instructions for checking product condition and contents before installation.
Guidelines for selecting a safe and suitable location for installing the PMDC-30.
Details recommended spacing around the PMDC-30 for adequate ventilation.
Instructions and dimensions for drilling mounting holes for the PMDC-30.
Configuration guide for dip switches to set output current and battery type.
To Next Page
