J
jackson09Aug 1, 2025
Why am I seeing lines in the video with my tbs electronics PowerCube Remote Control?
- TTyrone RamirezAug 1, 2025
If you are experiencing lines in the video, it could be due to an interruption in the 5V and 12V supply line. Try soldering the 6 pin headers that connect the power distribution board with the TBS DCDC, especially on the TBS DCDC side. Alternatively, high-draw R/C receivers or telemetry devices may be introducing interference. In this case, place an LC filter in line with the FPV transmitter line. For very noisy R/C receivers like the FrSky X4RSB or D4R-II, power the receiver from a separate 5V supply.