9
Setup examples
Amp input
FX loop send
FX loop return
Drive
pedals
Modulation
pedals
Setup example 3: Ditto Looper in an FX loop
If you are using an amp equipped with an FX Loop, place your
modulation effects and Ditto Looper in that FX loop.
The sound of silence:
True Bypass and Analog Dry-through
Here at TC, we have a simply philosophy: When you are using
one of our products, you should hear something great – and if
you don’t, you shouldn’t hear it at all. This is why this pedal sports
True Bypass . When it is bypassed, it is really off and has zero
influence on your tone, resulting in optimum clarity and zero loss
of high-end. Also please note that Ditto Looper lets your dry, un-
processed sound pass without ever converting it to digital, keeping
your original tone pure and without any latency.
Setup examples
Amp input
Setup example 1: Basic looping – no effects
Amp input
Drive
pedals
Modulation
pedals
Setup example 2: Ditto Looper and effects
Place your effects before Ditto Looper. This will allow you to cre-
ate and record different sounds within the same looping session.
To Next Page
Loading...
