a
Working with loops 7
Recording your first loop 7
Setting loop playback volume 7
Overdubbing 7
Undo (deleting the last take) 7
Redo (restoring a previously deleted take) 7
Using Undo/Redo creatively 8
Stopping loop playback/recording 8
Deleting the loop 8
Storing the loop 8
Setup examples 9
True Bypass and Analog Dry-through 9
FAQ 10
Table of contents
Introduction 1
Important safety instructions 2
EMC/EMI 3
Unpacking and setting up 4
Ditto Looper in 30 seconds 5
Operation 5
Technical Specifications 5
Input, output, controls 6
Power input 6
Audio input 6
Audio output 6
Footswitch 6
Loop Level knob 6
USB connector 6
To Next Page
Loading...
