TC Electronic Flashback Triple Delay - Page 33

Frequently asked questions
Flashback Triple Delay English manual 2014-10-14 31
Frequently asked questions
about TonePrint pedals
“Are TonePrint pedals analog or digital?”
Both. The dry, analog signal of your guitar pass-
es straight through this effect pedal and is in no
way digitized. The “wet” (digitally processed)
signal is added.
“Do the TonePrint pedals have balanced
or unbalanced inputs/outputs?”
TonePrint pedals have unbalanced inputs and
outputs. Use cables with TS jacks (i.e., standard
instrument cables).
“Is it possible to run this TonePrint pedal
in the effects loop of a tube amp?”
Yes. All TonePrint pedals have a very wide gain
range and are designed to run at both instru-
ment and line level. There are a few amps which
are capable of running much hotter than regu-
lar +4dBu line-level signals because of the way
their effect loops are designed. With these amps,
it might be possible to get the input to clip. But
for 99 % of all amps, the TonePrint pedals will
work just fine.
For additional information about your TC Elec-
tronic TonePrint effect pedal, please go to TC
Electronic Support:
tcelectronic.com/support/
“Does the Flashback Triple
Delay have a looper?”
Flashback Triple Delay has no looper. TC Elec-
tronic guitar effect pedals with a looper include
►
the Flashback delay
►
the Flashback X4 Delay & Looper
►
the Alter Ego V2 Vintage Echo
►
the Alter Ego X4 Vintage Echo.