Technical specifications
Flashback X4 Delay – Manual (2014-06-24) 38
Please note that due to continuous development, the following specifications are subject to change without further notice.
Bypass mode True Bypass (Buffered Bypass optional)
Signal circuitry Analog dry-through
Dimensions (width x depth x height) 235 x 145 x 57mm
Input connector 2 Standard ¼” jacks – mono/TS with automatic mono/stereo sensing
Input impedance 1MΩ
Output connector 2 Standard ¼” jacks – mono/TS with automatic mono/stereo sensing
Output impedance 100Ω
Expression pedal connector Standard ¼” jack
Power input Standard 9V DC, centre negative >300mA (power supply included)
MIDI IN + MIDI THRU Standard 5 Pin DIN connectors
USB port Mini USB connector for uploading and editing custom TonePrints and for software updates