DELAY - PINGPONG (M•ONE XL ONLY)
Ping Pong
Delay time
Range: 0 to 1800ms
The time between the repetitions.
Feedback
Range: 0 to 100%
Determines how many repetitions there will be.
Width
Range: -100 to 100%
The Width parameter determines whether the
Left or Right repetitions is panned 100% or
not. 10 is the most extreme setting but also the
most disturbing in the overall sound.
Experiment with this.
FB Hi Cut - Feedback Hi Cut
Range: 2.00kHz to 20kHz
Attenuates the frequencies over the set
frequency thereby giving you a more analog
Delay sound that in many cases will blend
better in the overall sound.
FB Lo Cut
Range: 19.95Hz to 2.00kHz
Attenuates the frequencies below the set
frequency.
FX Level
Range: 0 - 100%
The over all level of the Delay.
28
To Next Page
Loading...
