TC Electronic M-ONE - Pitch - Detune & Pitch Shift

31
PITCH - DETUNE & PITCH SHIFT
Pitch Detune
Pitch Detune is similar to the Pitch algorithm
meaning that a fixed voice is added to the
signal. However the range in a Detune
algorithm is considerably lower and is often
used to create a wide sound as opposed to a
second voice.
By using approx. 5-10 cent of Detune amount
you will get a chorus sounding effect without
the modulating/swirling motion that is so
characteristic for the chorus, but in some
cases disturbs the clarity of the sound.
Pitch 1+2
Range: -50 - 50 cent
The pitch value of the selected voice.
Level 1+2
Range: -100 - 0dB
The level of the selected voice.
Pan 1+2
Range: 50L to 50R
Controls the panning of the selected voice.
Delay 1+2
Range: 0 - 100ms
The Delay time of the selected voice.
FX Level
Range: 0 - 100%
The level of the entire effect.
Pitch Shift
The M•ONE Pitch algorithm allows you to add
2 separate fixed voices to the source signal. In
the following parameter description these are
referred to as 1 and 2.
Pitch 1
Range: -1200 - 1200 cent
Determines the pitch value of the first fixed
voice.
As 100 cent is one semitone you are able to
add a second voice withing the range of +/-
one whole octave.
Level 1
Range: -100 - 0dB
The level of the added voice.
Pan 1
Range: 50L to 50R
Controls the panning of the first voice.
Delay 1
Range: 0 - 100ms
The Delay time of the added voice.
Pitch 2
Range: -1200 - 1200 cent
Determines the pitch value of the second fixed
voice.
Level 2
Range: -100 - 0dB
The level of the second added voice.
Pan 2
Range: 50L to 50R
Controls the panning of the second voice.
Delay 2
Range: 0 - 100ms
The Delay time of the added voice.
FX Lev
Range: 0 - 100%
The Level of the entire effect.