TC Electronic M-ONE - Chorus - Classic & 4-Voice

29
CHORUS - CLASSIC & 4 VOICE
Classic
A Chorus/Flanger is basically a delay
being pitch-modulated by an LFO (Low
Frequency Oscillator).
The M•ONE Classic Chorus is based on
2 voices and produces a smooth natural
sounding chorus.
Speed
Range: 0.05 - 19.2Hz
The Speed of the Chorus. Also known as
”Rate”.
Depth
Range: 0 - 100%
The Depth of the Chorus. Also known as
”Intensity”.
Delay
Range: 0 - 100ms
A Chorus is basically a delay being pitch-
modulated by an LFO (Low Frequency
Oscillator). The typical Delay time used in
a Chorus is around 10ms.
FX Lev
Range: 0 -100%
The level of the Chorus effect.
L
R
CHORUS
LFO
L
R
4-Voice
The 4-voice Chorus is based on two Classic
Chorus blocks connected in serial, phase-
reversed and with a fixed Delay time. This
gives you twice the amount on “voices” and
produces a much thicker sounding Chorus
effect compared to the Classic algorithm.
Speed
Range: 0.05 - 19.2Hz
The speed of the Chorus. Also known as
”Rate”.
Depth
Range: 0 - 100%
The depth of the Chorus. also known as
”Intensity”.
FX Lev
Range: 0 -100%
The level of the Chorus effect.