TC Electronic M-ONE - Introduction

INTRODUCTION
Congratulations on the purchase of your new TC Electronic M•ONE or M•ONE XL unit.
The M•ONE is a Dual Engine Multi-effects Processor, focusing mainly on high quality Reverbs. The
M•ONE can be used for a number of purposes due to flexible routing of the two Engines and more
than 20 TC algorithms. Do you want two independent Reverbs, controlled from separate Auxiliary
sends? Select the Dual Input Routing plus two Reverbs, and you are up and running. Do you want
a compressor in front of a Delay? Select the Serial Routing, a Compressor and a Delay. You can
even tap the Delay time on the TAP key. Or maybe you just want stick with that one Routing, no
matter the preset? Simply use the Routing Lock function to avoid routing changes at preset change.
It is really as easy as that, go ahead and tweak some keys and knobs. We hope you have as much
pleasure using the M•ONE as we had making it.
Please note that this manual covers both the M•One and the M•One XL. Both products will in
general be referred to as “M•One”. When a feature relevant only for the XL version is
covered, this will be marked with “XL only”.
• Hall
• Room
• Small Room
(XL only)
• Plates 1&2
• Spring
• Live
• Ambience
• Delay One Tap
• Delay Two Tap
• PingPong Delay
(XL only)
• Chorus Classic & 4-voice
• Flange: Classic & 4-voice
• Pitch: Detune & Pitch Shift
• Parametric EQ
• Compressor/Limiter
• Gate/Expander
• De-esser
• Tremolo
• Phaser
Though the M•ONE is focusing on high quality Reverb you will discover that the
M•ONE also covers a wide variety of other algorithms. Experience and enjoy !
5