TC Electronic TC 2290 User Manual

Show keycode:
To help when programming the <ASSIGN KEYS this function displays the keycode number
of the last key pressed:
EXAMPLES:
<SPEC><2><2><ENTER>
now pressing: shows:
<DYN.MOD> ;'76’, the keycode for
<PAN.MOD> ;’73’, the keycode for
or: will show:
<PRESET> ; 30’, the keycode for
<0> ;’0’, the keycode for
<STORE> ; 34, the keycode for
.. etc.
; (shows ’11’, as the last key pressed was <ENTER>)
<DYN.MOD>
<PAN.MOD>
<PRESET>
<0>
<STORE>
Please note that the 2290 functions normally, even when this ‘display keycode’ is enabled.
This means that activating any key that results in the delay display being used cannot be shown
(Keys like <DELAY UP>, <DELAY DOWN>, <SPEC>, <MIDI CH>). For these as well as of
course the imagekeys, refer to the appendix sec. [9.5] Keycode List.

TC Electronic TC 2290 Specifications

General

Brand	TC Electronic
Model	TC 2290
Category	Computer Hardware
Language	English