TC Electronic TC 2290 - The 10 Presets You Have Made

3.11 The 10 Presets, you have made
If you followed all the examples your 10 presets will look like this:
PRESET r——Modulations -——,
No. Name Delay Feedb. Panmod Dynmod Diymod
Prolene an a eh Meee ee a peed) eo. i
1 Echo 400 50 ;
2 Dyn Ducked Delay 400 25 , on
3 Dyn Gated Delay 400 25 ; on
4 Tremolo (0) 0 on
5 Chorus 25 O ; ; on
6 Flanger 2 50 . . on
7 ADT 80 25 on on on
8 Panned delay 400 50 on :
9 Left/Right Switching 400 50 on
10 Echo w. bypasstail 400 50 :
Ce a ee ae ee i, ety
Of course these are examples only, change to your needs every parameter
you want.
You may have noted that the last preset cipher starts blinking after every
<PRESET><number><ENTER> sequence. This indicates the ‘SINGLE KEY
PRESET SHIFT MODE’. - In this mode only a single numeric key has to be
pressed to shift preset within the ‘decade’ or ‘bank’.
Try shifting between 9 of your presets using this ‘SINGLE KEY PRESET
SHIFT MODE’.
Preset #0 is a special ‘autostore’ preset, every time you recall a preset the
current frontsettings are stored in preset #0. If you forget to store your
current settings before you recall another, you can find the ‘lost settings’ in
preset #0.