EasyManua.ls Logo

TC Electronic M350 - User Manual

TC Electronic M350
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
M350
DUAL ENGINE PROCESSOR
UUSSEERRSS MMAANNUUAALL
Question and Answer IconNeed help?

Do you have a question about the TC Electronic M350 and is the answer not in the manual?

Summary

Important Safety Instructions

EMC; EMI Compliance

Electromagnetic compatibility and interference standards for the M350 processor.

Front Panel Overview

Rear Panel Overview

Typical Setups and Configurations

Dual Input Mode Setup

Connecting the M350 as two separate effects with a common output.

Operating: Input;Output Section

Input;Output Controls

Explains input gain, LEDs, Mix Ratio, Bypass, and Effect Balance controls.

Delay Effects

Delay Algorithm Controls

Detailed operation of timing, feedback, and tap tempo for delay effects.

Compressor Controls and Basics

Operation of Drive, Ratio, and general principles of the compressor effect.

Reverbs

Reverb Parameters

Details on Pre Delay, Decay, and Color controls for reverb.

Store, Recall & Display

Preset Management

Explains preset modes, loading, storing, and display functions.

Routings

Appendix: MIDI CC, Reset & Bulk Dump

Summary

Important Safety Instructions

EMC; EMI Compliance

Electromagnetic compatibility and interference standards for the M350 processor.

Front Panel Overview

Rear Panel Overview

Typical Setups and Configurations

Dual Input Mode Setup

Connecting the M350 as two separate effects with a common output.

Operating: Input;Output Section

Input;Output Controls

Explains input gain, LEDs, Mix Ratio, Bypass, and Effect Balance controls.

Delay Effects

Delay Algorithm Controls

Detailed operation of timing, feedback, and tap tempo for delay effects.

Compressor Controls and Basics

Operation of Drive, Ratio, and general principles of the compressor effect.

Reverbs

Reverb Parameters

Details on Pre Delay, Decay, and Color controls for reverb.

Store, Recall & Display

Preset Management

Explains preset modes, loading, storing, and display functions.

Routings

Appendix: MIDI CC, Reset & Bulk Dump

TC Electronic M350 Specifications

Digital Input and Output IconDigital Input and Output
sample rates44.1 kHz (44.1 kHz and 48 kHz @ Digital Input)
processing delay0.08 ms @ 48 kHz
frequency response DIODC to 23.9 kHz ± 0.01 dB @ 48 kHz
Analog Inputs IconAnalog Inputs
impedance bal / unbal21 kOhm / 13 kOhm
max / min input level @ 0 dBFS+24 dBu / 0 dBu
sensitivity range @ 12 dB headroom-12 dBu to +12 dBu
Analog Outputs IconAnalog Outputs
impedance bal / unbal40 Ohm / 20 Ohm
max output level+14 dBu
frequency response+0/-0.5 dB, 20 Hz to 20 kHz
Operating Environment IconOperating Environment
operating temperature32° F to 122° F (0° C to 50° C)
storage temperature-22° F to 167° F (-30° C to 70° C)
humidityMax. 90 % non-condensing
General IconGeneral
dimensions19" x 1.75" x 4.2" (483 x 44 x 105.6 mm)
weight3.3 lb. (1.5 kg)
mains voltage100 to 240 VAC, 50 to 60 Hz (auto-select)

Related product manuals