27
DELAY-EFFECTS
Hard Tremolo/Soft
Tremolo
A tremolo is basically a repeated level change
controlled by an LFO. The M350 offers a Soft
Tremolo that uses a “triangular” wave shape.
Please see the illustration below.
Soft Tremolo – Triangular shape
Phaser
Smooth Phaser and Vintage Phaser
The Vintage Phaser utilizes four all-pass filters.
These filters create comb-looking characteristics.
When the filtered sound is mixed with the direct
sound, the “phasing sound” occurs.
The Smooth Phaser utilizes twelve all-pass
filters. It is the higher number of filters in the
Smooth Phaser that allows the Smooth Phaser
to sound smoother than the Vintage type.
Phaser – Controls
TIMING knob
In the Phaser algorithm, the TIMING knob
sets the speed of the Phaser.
FEEDBACK/DEPTH knob
In the Phaser algorithm, the
FEEDBACK/DEPTH knob sets the depth of
the phasing effect.
Tremolo – Controls
TIMING knob
In the Tremolo algorithm, the TIMING knob
sets the speed of the tremolo.
FEEDBACK/DEPTH knob
In the Tremolo algorithm, the
FEEDBACK/DEPTH knob sets the depth of
the tremolo effect.
To Next Page
