TC Electronic TC 2290 User Manual

Spec Min/max Fac. Preset/ Name/
Value Default global Function
fea hs a le —— eM ps a es a ee EN A A OT
No.
14
15
16
17
18
19
20
21
22
23
24
25
26
0-255
0-99
0,1,2
(0)
O O00000
99
global
giobal
global
global
global
global
global
global
global
global
global
global
preset
Manual Delay On Control
(‘=manual, 'O'=in preset)
Manual Sample Control
Manual Outgain Control
Manual Dirgain Control
Manual Ext.Eff. Control
Keyboard Lock, '1' enables a double
<ENTER><ENTER> on keyboard ‘locks’ keyb.
to the parameter, preventing other
<UP/DOWN> keys ‘catching’ keyboard.
Pressing <.><.>, <PRESET>, <CHANGE> or
<SPEC> will remove the lock.
Special Number Roll, for the user often
programming spec.#.- Set to ' to enable
‘special number roll’. <SPEC> rolls forward
one number, <ENTER> rolls forward to next
spec.value. <DELAY UP/DOWN> cancels
spec no.display.
SpecNo.Sys - for service only.
Show Keycode, to help when programming
the assign keys. Selecting this results in the
display of keycodes of all following
keypressings. Note that the TC 2290
functions unaffected by this ‘show keycode
in delay display’ so all keycodes for keys
that result in a changed delay display can
not be shown. These are DELAY UP>,
<DELAY DOWN>, <SPEC>, <MIDI CH> and
<LEARN>.
Last Error, Shows last occurred errorno. If you
have had error. no.13 (=presets and spec.no
overwritten by fac. defaults) a 'O' must be
entered here to tell the TC 2290 that you
have seen the error. Check the Error #. List
for other possible error nos.
Fatal Error. Show last-.(service only).
Direct Signal bypass volume.
If Bypass Method (spec 26) is set to ‘output
mute’ (val.1} or ‘mute both’ (val.2), this spec.no
25 decides the volume of the direct signal
when delay is bypassed {w. the <DELAY
ON> toggle key)
Bypass Method, selects between 3 bypass
methods: Input mute.(0) for ‘a tail of delay’ or
Output mute (1) for ‘history, but no tail’ or
both (2) for ‘no history, no tail’ when
bypassing.

TC Electronic TC 2290 Specifications

General

Brand	TC Electronic
Model	TC 2290
Category	Computer Hardware
Language	English