TC Electronic TC 2290 User Manual

Spec Min/max Fac. Preset/ Name/
No. Value Default giobal Function
37 0-9999 0 global Reset - If you write 'T in this spec. no. the
factory presets 80-99 are restored at the
next power on/off sequence. Otherwise if the
number ‘'2290' is not the value of this spec.
no, a total reset of the TC 2290 is
performed at next power on/off.The reset
includes all presets and special-nos. are set
to the factory default values.
Note that at the following power-up the
errorno. '13' is shown (presets lost) until you
write ‘O' in the spec.no 23 to tell TC 2290
that you are aware that presets are lost.
38 1000-
9999 1023 global Max.Dlytime sets max delaytime when pressing:
<LEARN> ~ when sampling (repeat/hold) how long
the repeating sample is. Turn off/on power before
active.
40-48 0-199 31 global Assign Key A String, default is
<PRESET UP>. (See section for programming
assign keys).
50-58 0-199 32 global Assign Key B String, default is
<PRESET DOWN>. (See section for
programming assign keys).
The numbers 60-99 are used for four remote assign switches, as used with
the TC 0050 Remote Switch Panel. You can also make remote switches
yourself, see the 2290-apn.04 note 'How to make remote switches’.
60-68 0-199 85 global Remote Assign Key 1 String, default is
<DELAY ON>. (See section for programming
assign keys).
70-78 0-199 36 global Remote Assign Key 2 String, default is
<LAST PRESET>. (See section for
programming assign keys).
80-88 0-199 31 global Remote Assign Key 3 String, default is
<PRESET UP>. (See section for programming
assign keys).
90-98 0-199 32 global Remote Assign Key 4 String, default is
<PRESET DOWN>. (See section for
programming assign keys).
Note that if the special is ‘in preset’ it means that there are 100 values,
one individual value for each preset. If the special no. is ‘global’ the
parameter is common to all presets.
Calling a spec.no other than the above will result in error #1.
Attempts to enter ‘out of range’ spec. values will result in error #2.
(The spec.nos from 25 and up are new or changed as compared to lower
EPROM version #}

TC Electronic TC 2290 Specifications

General

Brand	TC Electronic
Model	TC 2290
Category	Computer Hardware
Language	English