TC-Helicon VoiceTone Correct

Using Two VoiceTone Pedals
12
You can use two VoiceTone pedals in series. For
example, a great combination is to have VoiceTone
Correct feeding a VoiceTone Create pedal. Generally,
Correct should be the first device in the chain.
Step 1:
Follow the Quick Start guide for both VoiceTone Pedals.
Step 2:
Instead of connecting your first VoiceTone pedal to the
PA, connect its mono output to the mic input on Create.
Step 3:
Connect the second VoiceTone pedal, in this case Create
to the PA.
Step 4:
Set VoiceTone Create’s Input Knob fully left.
Step 5:
Use the first pedal’s Input Knob to set the microphone
gain.