18
Main / Monitor Setup
While Correct’s pitch correction is so transparent that
your audience may never know you're using it, we
suspect there'll always be purists who'd rather the
audience hear only their raw and naked voice. Using the
Guide Output, you can route your pitch corrected voice
to your monitor mix, while your audience hears no
correction effect from the Main Output.
Connecting and Enabling for Main/Monitor
Setup:
1. Connect your microphone to Correct's Mic Input.
2. Connect to your sound system as in diagram: Main
Output to your front-of-house sound system’s mic input,
and the Guide Output to your personal voice monitor,
or monitor mix channel.
3. Connect Correct's power adapter to main power
and to the Power Input on Correct.
Setup Configurations
To Next Page
Loading...
