11
Chapter 4 Using more of your TV
2.
Press
▲/▼
to select a subtitle language as your
preferred language and press
OK
to conrm.
3.
Press
▲/▼
to select
Digital Subtitle Language 2nd
and press
OK/►
to enter.
4.
Press
▲/▼
to select a secondary subtitle language
and press
OK
to conrm.
5.
Press to close the menu.
Selecting a Subtitle Type on Digital TV Channels
1.
Press
on the remote control, select
Channels >
Subtitle > Subtitle Type
and press
OK/►
to enter.
2.
Press ▲/▼ to select a subtitle type and press
OK
to
conrm. You can select
Hearing Impaired
to display
the hearing impaired subtitles with your selected
language.
3.
Press to close the menu.
Using Teletext
Selecting Decoding Page Language
1.
Press
on the remote control, select
Channels >
Teletext > Decoding Page Language
and press
OK/►
to enter.
2.
Press
▲/▼
to select a proper type of language in
which Teletext will display and press
OK
to conrm.
3.
Press to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1.
Press
on the remote control, select
Channels >
Teletext > Digital Teletext Language
and press
OK/►
to enter.
2.
Press
▲/▼
to select a language and press
OK
to
conrm.
3.
Press to close the menu.
Network Wake Up
(* not available for some models)
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure
:
1.
Your TV is connected to an effective home network;
2.
The desired controller, such as a smartphone, is
connected to the same network as your TV;
3.
An app which supports network waking up function,
such as YouTube, has been installed into the
controller;
4. Networked
standby
is set to on in the
Network &
Internet
menu under homepage. Press o
n the
remote control,
select
(Settings) >
Network &
Internet
,
use
▼
to select
Networked
standby
and
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
-
you are prompted that there are no channels in TV
mode;
-
you want to update your channels.
1.
In TV mode, press
on the remote control and
select
Channels
>
Channel scan
. Press
OK
/► to
enter.
2.
The TV installs and arranges channels according
to your country or region. Press ▲/▼ to select
Country/Region
, and press
OK
/► to enter. Enter
the default password
1234
or your own password in
case you have changed the password in the
System
>
Lock
menu. Press ▲/▼ to select your country or
region and press
OK
to confirm.
3.
Press ▲/▼ to select
Scan Automatically
and press
OK
/► to enter.
4.
Press ▲/▼ to select
Channel Type
and press ◄/►
to select
Digital
,
Analogue
or
Digital&Analogue
.
5.
After configuration is completed, press ▼ to select
Search
and press
OK
to start scanning channels.
6.
The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select
Channels
>
Channel Organizer
and press
OK
/► to enter.
Note:
If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Note:
Some options are available only when
Subtitle
is
set to on.
Turning On/Off Subtitles
1.
Press
on the remote control, select
Channels >
Subtitle
and press
OK/►
to enter. You can also
press
on the remote control, select
Subtitle
to
enter.
2.
Select the
Subtitle
option, and press
OK
to toggle
between on or off.
3.
Press to close the menu.
Enabling Subtitle Languages on Digital TV Channels
1.
Press
on the remote control, select
Channels >
Subtitle > Digital Subtitle Language 1st
and press
OK/►
to enter.
To Next Page
Loading...
Need help?
General
