TCL HH500V

20
Settings
7.5 
7.5.1 WAN port
Basic
SetuptheWANconnectionmodeandparametershere.Youcansettheconnectionmodeto
DHCP,PPPoEorStacIP.
y
DHCP
:DynamicHostConfigurationProtocol(DHCP)isaclient/serverprotocolthat
automaticallyprovidesyouwithaninternetProtocol(IP)host.TheIPaddressandrelated
conguraonsengssuchassubnetmaskanddefaultgatewayareallautomacallyassigned.
SelectDHCPandclick
Apply
.
y
PPPoE
:PPPoEstandsforPoint-to-PointProtocoloverEthernet.Thisisanetworkprotocolthat
ismainlyusedforDSLserviceswhereindividualusersconnecttoamodemusinganEthernet
connecon.Entertheusernameandpasswordprovidedbyyournetworkserviceproviderand
click
Apply
.
y
Static IP
:accesstheinternetusingafixedIPaddress,subnetmask,gatewayIPaddressand
PrimaryDNSserver,theseshouldbeprovidedbyyournetworkserviceprovider.
MAC Clone
UsingtheMACClonefuncon,mulpleclientscanconnecttothedeviceandaccesstheinternet.
YourcurrentMACaddressisdisplayedhere.Click
Reset
tosetanewMACaddress.Click
Clone
to
copyyourhostMacaddress.