• Please make sure you have entered it correctly in your web browser192.168.1.1 .
• Make sure the CPE is powered on.
• Check that the device is properly connected to the CPE network.
I can't log in to the web UI.
1. Log in to the web user interface.
2. Go tosystem>Login password.
How do I change my login password?
• Make sure you have a SIM card in your CPE.
"No SIM card" or "Invalid SIM card" is displayed on the
web interface.
• Reinstall the SIM card and log in to the web interface again. Notice:
Before removing the SIM card, power off your device.
Connection problem
problem solution
• If the SIM card is not detected, please power off the CPE, reinsert the
SIM card, and try again.
• If a PIN is required, enter the PIN and try again.
• If the network is not detected, please place the CPE in a place with better signal
(such as near a window) and try again.
I cannot access the Internet.
• Restart your CPE and try again.
• After enabling MAC filtering, make sure your device MAC address is
on the whitelist.
Select the CPE's Wi-Fi name (or SSID) on your wireless
device and enter the Wi-Fi password.
How do I access the CPE network wirelessly?
road?
Notice:The default Wi-Fi name and Wi-Fi password can be found on the
bottom label of your CPE.
It indicates that the SIM card is locked.
To unlock the SIM card, log in to the web user interface and enter the
PIN or PUK code. To obtain a PUK code, please contact your Internet
service provider.
The screen of the device connected to the CPE network will display
Displays "PIN Lock" or "PUK Lock".
Notice:If you enter the PIN incorrectly 3 times, you will be asked to enter the PUK
code. If the PUK code is entered incorrectly 10 times, the SIM card will be
permanently locked.
19
To Previous Page
Loading...
Need help?
General
