3.2.3 Select Loco
The Select Loco button has been expanded to allow additional entry methods.
Number of times the Select
Loco Key is Pressed
Enter a two or four digit DCC address. To
enter a four-digit address that is less than 128,
add an extra leading zero. Example: to select
long address 58, type in 058.
Enter Märklin-Motorola address
Scrolling list of database search query results.
Enter digits to filter the list. Use the INC/DEC
buttons or thumbwheel encoder to scroll
through the list.
The scrolling list search entry can be particularly useful when trying to use locomotive protocols that are not
DCC or Märklin-Motorola. A direct wirelessly equipped locomotive designed to natively use the LCC
protocol is one such example. Up and down arrows indicate which direction(s) the list can be scrolled.
Because custom graphics are not supported in wireless mode, a '.' is used in their place or the up and down
arrows when operating in wireless mode.
The additional entry methods are only available on cabs that have LCD's. For cabs without LCD's (Cab-04,
Cab-06, etc…), address entry is always DCC mode and search is not supported. A non-DCC address can
be assigned to a cab without an LCD through the ASSIGN LOCO->CAB programming menu on an LCD
cab.
© 2022 Train Control Systems Page 12 of 49
To Next Page
Loading...
Need help?
General
