DRAFT
4.4.1 Consist Behavior 19
4.4.2 Headlight MU switch 20
4.5 Special Features of Headlight (F0) 20
4.5.1 Directional Control 20
4.5.2 Blank F0 Forward/Reverse 21
5 Operating Trains 21
5.1 Speed and Function Operations 21
5.2 Consisting 21
5.3 Technical information 22
5.3.1 Status screen 22
5.3.2 Locomotive stack 22
5.3.3 Start-up behavior 23
5.3.4 Packet prioritization and repetition 23
5.3.5 RailCom®-enabled DCC decoders 23
5.3.6 Heartbeat 23
5.3.7 Speed mapping 23
6 DCC Decoder Programming 24
6.1 Mainline Programming 24
6.1.1 OPS mode programming with RailCom® 24
6.1.2 OPS mode programming without RailCom® 24
6.2 Programming Track Programming 25
6.2.1 Direct Mode Programming 25
6.2.2 Paged Mode Programming 25
6.3 DCC Address Programming 26
6.3.1 Short Address Programming 27
6.3.2 Long Address Programming 27
6.3.3 Consist Address (CV 19) Programming 28
7 Configuration 29
7.1 Factory Reset 29
7.2 Push Button Track Power On/Off 29
7.3 Push Button Configuration Mode 30
7.3.1 Secure AP Configuration Mode Entry 30
7.3.2 Open AP Configuration Mode Entry 30
© 2022 Train Control Systems Page 3 of 49