To Next Page

To Previous Page

DRAFT

To search for and download a firmware file for your product, visit the TCS website .

Note: After downloading, it is recommended that you copy or move the firmware file into a safe place that is

easy to find, and not your downloads folder.

To reduce the possibility of mistakes and confusion, we recommend ensuring that you connect only the

TCS device you are planning to update to the device performing the update. It is recommended, but not

necessary, that you also shut down any active JMRI WiThrottle servers.

1. Use the instructions under 7.4.1 Web Server Based Configuration to open the CS-105’s builtin

web-page.

2. Use the instructions under 9 Updating the Software Version to switch the device to bootloader

mode. There will be a brief disruption to the CS-105’s WiFi connection.

3. If you are using Access Point mode, ensure that your device is still connected to the CS-105’s WiFi.

4. Press Reload in your web browser window showing the CS-105 web page. A new menu item

“Firmware Update” will appear:

5. Click the "Firmware Update" tab at the top. It will take a few seconds to load the new page, which

looks like this:

https://tcsdcc.com/firmware

Other manuals for TCS CS-105

Questions and Answers:

Need help?

Do you have a question about the TCS CS-105 and is the answer not in the manual?

General