Teac A-2340 - Signal to Noise Ratio

ELECTRICAL
TRANSISTORS:
DIODES:
FREQUENCY RESPONSE:
INPUT:
OUTPUT:
SIGNAL TO NOISE RATIO:
BIAS FREQUENCY:
CROSSTALK REJECTION:
CHANNEL SEPARATION:
ERASE EFFICIENCY:
2SC1000 (BL) x 2 2SC693(GU) x 4
2SA666I(S) x 2 2SC644(T) x 2
2SC828(S) x 10 2SC971 x 2
2SC536(F) x 2
FR2-06 x 4
FR2-10 x 4
7-1/2ips 40Hzv18kHz +3dB
3-3/4ips 50Hzv10kHz +3dB
MIC: 0O.3mV/10k2
LINE: 0.1V/100k&
LINE: approx. 0.3V/10kQ or more
HEADPHONE: 0. 3mW/82
7-1/2ips 48dB or higher
3-3/4ips 46dB or higher at playback
100*5kHz push-pull oscillator
35dB or more adjacent track at 100Hz
45dB or more channel to channel at 1kHz
60dB or more at 7-1/2ips
NOTE
As a result of continuing changes and improvements during the
production run, minor differences may be found between early
and later machines.
Refer to manual change sheets for infor-
mation concerning modifications.