Need help?Do you have a question about the Teac A-3300SR and is the answer not in the manual?
Technical specifications for the TEAC A-3300SR tape deck.
Technical specifications for the TEAC A-2300SR tape deck.
Mechanical specifications and data for tape speed, wow, flutter, and torque.
Electrical specifications and data for performance checks.
Lists required tools like VTVM, frequency counter, and demagnetizer.
Instructions for accessing internal components by removing panels.
Steps for removing and replacing the head assembly.
Procedure for removing the capstan motor.
Steps to remove the capstan assembly.
Procedure for removing the reel motor.
Instructions for removing tension arms.
Diagrams showing the location of tape transport parts on the rear.
Steps for replacing and wiring tape heads.
Identification of screws and nuts for head adjustment.
Procedure for visually aligning tape heads.
How to measure and adjust pinch roller pressure.
Procedure for measuring and adjusting brake torque.
Procedure for measuring take-up torque.
Procedure for measuring back tension.
How to check tape speed.
Procedure for checking wow and flutter.
How to change voltage and frequency settings.
Identifies adjustment points and their functions on the PC boards.
Flowchart detailing the sequence of electrical adjustments.
Procedure for checking and adjusting the power supply voltage.
Steps for adjusting the playback head azimuth.
How to set output levels.
Procedure to set VU meter levels to 0 VU.
Measuring playback frequency response using test tape.
Checking the playback signal-to-noise ratio.
How to set the monitor level.
Setting line controls to specified values.
Procedure for checking microphone input levels.
How to check headphone output level.
Procedure for adjusting the bias trap.
Steps for adjusting the record head azimuth.
Procedure for setting the bias level.
How to set the record level.
Procedure for checking overall frequency response.
Procedure for checking overall signal-to-noise ratio.
How to measure tape erasure effectiveness.
Procedure for checking channel separation.
How to check track-to-track crosstalk.
Procedure for checking audio distortion.
Recommended cleaning methods and agents.
Steps for lubricating mechanical parts.
Lists TEAC maintenance fluids.
How to demagnetize tape heads.
Schematic diagram with signal level indications.
Guidelines for ordering spare parts.
Detailed illustration and part list for A-3300SR.
Detailed illustration and part list for A-2300SR.
Detailed illustration and part list for A-3300SR.
Detailed illustration and part list for A-2300SR.
Detailed illustration and part list for both models.
Detailed illustration and part list for both models.
List of accessories included with the unit.
Technical specifications for the TEAC A-3300SR tape deck.
Technical specifications for the TEAC A-2300SR tape deck.
Mechanical specifications and data for tape speed, wow, flutter, and torque.
Electrical specifications and data for performance checks.
Lists required tools like VTVM, frequency counter, and demagnetizer.
Instructions for accessing internal components by removing panels.
Steps for removing and replacing the head assembly.
Procedure for removing the capstan motor.
Steps to remove the capstan assembly.
Procedure for removing the reel motor.
Instructions for removing tension arms.
Diagrams showing the location of tape transport parts on the rear.
Steps for replacing and wiring tape heads.
Identification of screws and nuts for head adjustment.
Procedure for visually aligning tape heads.
How to measure and adjust pinch roller pressure.
Procedure for measuring and adjusting brake torque.
Procedure for measuring take-up torque.
Procedure for measuring back tension.
How to check tape speed.
Procedure for checking wow and flutter.
How to change voltage and frequency settings.
Identifies adjustment points and their functions on the PC boards.
Flowchart detailing the sequence of electrical adjustments.
Procedure for checking and adjusting the power supply voltage.
Steps for adjusting the playback head azimuth.
How to set output levels.
Procedure to set VU meter levels to 0 VU.
Measuring playback frequency response using test tape.
Checking the playback signal-to-noise ratio.
How to set the monitor level.
Setting line controls to specified values.
Procedure for checking microphone input levels.
How to check headphone output level.
Procedure for adjusting the bias trap.
Steps for adjusting the record head azimuth.
Procedure for setting the bias level.
How to set the record level.
Procedure for checking overall frequency response.
Procedure for checking overall signal-to-noise ratio.
How to measure tape erasure effectiveness.
Procedure for checking channel separation.
How to check track-to-track crosstalk.
Procedure for checking audio distortion.
Recommended cleaning methods and agents.
Steps for lubricating mechanical parts.
Lists TEAC maintenance fluids.
How to demagnetize tape heads.
Schematic diagram with signal level indications.
Guidelines for ordering spare parts.
Detailed illustration and part list for A-3300SR.
Detailed illustration and part list for A-2300SR.
Detailed illustration and part list for A-3300SR.
Detailed illustration and part list for A-2300SR.
Detailed illustration and part list for both models.
Detailed illustration and part list for both models.
List of accessories included with the unit.
General| Type | Reel-to-reel tape deck |
|---|---|
| Track Configuration | 4-track, 2-channel stereo |
| Heads | 3 (Erase, Record, Playback) |
| Reel Size | 7 inch |
| Tape Speed | 7.5 and 15 ips |
| Frequency Response | 30 Hz to 20 kHz |
| Wow and Flutter | 0.08% (7 1/2 ips) |
| Input | Line |
| Output | Line |
| Dimensions | 440 x 440 x 230 mm |
To Next Page
