Teac A-2340 - Location of Controls; TAPE SPEED selector; Head housing

REMOVAL OF TENSION ARMS LEFT & RIGHT
See illustration for complete disassembly instructions.
IMPORTANT
After reassembly check
clearance to ascertain
that arm moves freely
and is not binding.
REMOVAL OF REEL MOTOR ASSY
1. Loosen 2 hex screws in brake
drum, lift off brake drum.
2. Remove 3 screws securing the
brake assembly to the motor.
3. Remove reel turntable, remove
4 screws securing motor to
front panel.
NOTE
Reel motor assemblies are mirror
images of each other, these as-
semblies are not interchangeable.
Fig. 4-5
Reel Motor Removal