27
Amplifier Section
Maximum power output
60 W + 60 W (JEITA 10%, 20 – 20 kHz, 4 Ω)
30 W + 30 W (JEITA 10%, 20 – 20 kHz, 8 Ω)
Rated power output
43 W + 43 W (JEITA 0.1%, 20 – 20 kHz, 4 Ω)
22 W + 22 W (JEITA 0.1%, 20 – 20 kHz, 8 Ω)
Total Harmonic Distortion ..0.01% (1 kHz, 8 Ω, 1W)
Signal-to-noise ratio
LINE IN ..95 dB (IHF-A/LPF 20kHz 1kHz 2V input)
Frequency Response ....2 Hz – 100 kHz (–5 dB)
Digital audio input
Coaxial digital jack (75Ω) × 1 ...........0.5 Vp-p
Optical digital connector × 1
−24.0 to −14.5 dBm peak
USB port (type B) connector ............USB 2.0
Supported sampling frequencies (PCM)
32/44.1/48/88.2/96/176.4/192 kHz
(96kHz maximum when using optical digital input)
Supported bit lengths ............16/24 bits
Supported sampling frequencies (DSD)
2.8/5.6 MHz
(only when connected by USB)
Bluetooth
Bluetooth version. ................... V2.1+EDR
Output ................................. Class 2
Supported profiles ................ A2DP, AVRCP
Headphones output
Rated output . 100 mW + 100 mW (32 Ω, 1 kHz)
Total harmonic distortion ...............0.005%
Specifications
o Design and specifications are subject to
change without notice.
o Weight and dimensions are approximate.
o Illustrations may differ slightly from produc-
tion models.
General
Power supply
Model for Europe ............AC 230 V, 50 Hz
Model for USA/Canada ......AC 120 V, 60 Hz
Power consumption ......................38 W
External dimensions (W × H × D)
215 × 61 × 254 mm
(8 3/8” × 2 3/8” × 10”)
(including protrusions)
Weight .........................2.1 kg (4 5/8 lb)
Operating temperature ..........+5°C to +35°C
Operating humidity ................ 5% to 85%
(no condensation)
Storage temperature ...........−20°C to +55°C
Accessories
Power cord × 1
Remote control unit (RC-1313) × 1
Batteries for remote control (AAA) × 2
Owner’s manual (this document) × 1
To Next Page
Loading...
