Teac CX-400iDAB - Listening to an External Source

32
1
Connect the PHONES jack (audio output jack) of a
portable audio player to the AUX IN jack of the
CX-400iDAB using the supplied stereo mini plug cable.
Listening to an External Source
3
Play the source, and adjust the volume using the
VOLUME buttons of the CX-400iDAB and the audio
player.
2
Press the FUNCTION button to select “AUX”.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no
sound from your CX-400iDAB.
 Turning the volume of the mini player up too high may cause
the sound from your CX-400iDAB to be distorted. If this is the
case, reduce the volume of the mini player until the distortion
stops and then adjust the volume level of the CX-400iDAB to
a comfortable listening level.