No sound:
* Ensure that the player is connected properly
with the other systems, such as power
amplifier or TV set.
* Ensure that TV set or power amplifier is
working properly.
* Check if MUTE button of the unit or TV
set is pressed.
* Examine whether the volume of TV set or
player is adjusted to minimum.
No picture:
* Ensure that the player is connected firmly
with the other systems, such as TV set.
* Ensure that the TV set is in normal working
state.
* Check whether the player is in stand-by
state.
Disc not playing
* Ensure that the disc is placed in the disc
holder correctly. (The label side is facing
up.)
*Ensurethatthediscisclean.
Remote control does not work.
* Remove the obstacles between the player
and the remote control.
* Point the remote control at the sensor on
the front panel of the player.
* Check whether the batteries have adequate
power.
No display or partial display :
* Check whether the disc is free of scratches and
clean.
* As the player is controlled by microcomputer,
when there is a trouble, please turn off the
power and turn on the player again after
several seconds. If the trouble is solved, the
player can be normally used again.
No output after turning on:
* Ensure that the interval between repeated
turning-on is not too short.
* Turn on the player again 10 seconds after
it is turned off.
To Next Page
Loading...
