Teac LCDV3253HD - Page 26

OPERATION
6.LOCK MENU
Press left/right button to toggle to LOCK MENU.
You can lock system, change password,block program, restore factory default
and set maximum volume control.
To enter the LOCK menu,password will be requested,the default password is 6666
LOCK System:
Press the buttons to turn ON or OFF. If it is set to ON,you will be asked to enter
password when searching the channels .
Password:
Press the or OK button and enter the new password.
Block Programme:
Press the or OK button to enter the program list.
Press the buttons to select the channel you want to lock then press the
green button to lock, the lock icon will appear behind the locked channel.
To unlock the channel, select the locked channel and press the green button
again, the lock icon will disappear.
Restore Factory Default:
Press the or OK button to restore,this operation will reset the unit to factory
default and all the settings and stored channels will be cleared.
Max Volume:
Press the buttons to set the maximum volume.
Change
-20-
EXIT
MENU
OK
LOCK
Lock System Off
Change Password
Block Programme
Restore Factory Default
Max Volume 100