Why does my Teac LCD TV have no picture or picture jitters?
D
David WilliamsAug 1, 2025
If your Teac LCD TV displays no picture or the picture jitters, verify that the connections with the external AV signal source are correctly connected. Also, ensure that the items in the picture menu are correctly set and that the video type input signal corresponds to the unit. Finally, confirm that the unit is turned on and set to the correct video type.
J
Joseph BaileyAug 6, 2025
What to do if Teac LCDV1955HD remote control does not work?
A
Andre WilliamsAug 6, 2025
If the remote control for your Teac LCD TV isn't working, first, ensure there are no obstructions between the remote and the player, and that the remote is pointed at the player. Next, check that the batteries are correctly inserted with the correct polarity and that the batteries aren't weak.
M
Michael RiosAug 11, 2025
Why is there no sound on my Teac LCDV1955HD LCD TV?
R
Rachel BakerAug 11, 2025
If you're experiencing a lack of sound on your Teac LCD TV, check that the system connection is correct and the sound setup of the DVD disc is correct. Also, make sure the disc isn't dirty or warped (clean or replace it if necessary). Ensure that the speakers are not muted and, in TV mode, set the correct sound mode.
I
iguzmanAug 16, 2025
What to do if my Teac LCD TV has no display?
M
Matthew SantiagoAug 16, 2025
If your Teac LCD TV has no display, ensure that the unit is turned on and the connections are correctly made. Also, check that the power adapter is correctly connected.
L
Leah MahoneyAug 21, 2025
How to fix Teac LCDV1955HD that cannot continue to play or plays a section repeatedly?
D
debrajenkinsAug 21, 2025
If your Teac LCD TV cannot continue to play or plays a section repeatedly, ensure that it is not in repeat status and that the disc is not dirty or damaged.
A
alexmillerAug 26, 2025
Why Teac LCDV1955HD LCD TV player cannot play?
M
Maria NelsonAug 26, 2025
If your Teac LCD TV player cannot play, verify that a disc is loaded. Check that the disc isn't dirty or warped, and that the player’s region code matches the DVD disc's region code. Also, ensure water condensation hasn't occurred; if it has, remove the disc and leave the player on for at least one hour.