Why is there no sound on my Teac LCD TV?
If your Teac LCD TV has no sound, first ensure the unit is turned on and all connections are correct. Next, verify that the volume isn't turned down or muted. Also, confirm that the sound setup is correct. If you are in DVD mode, check that the disc is clean and not warped.
What to do if my Teac LCD TV can't play discs?
If your Teac LCD TV unit can’t play discs, ensure the disc is loaded correctly and is not dirty or warped. Also, verify that the region code of the disc matches the region code of the DVD player. Finally, make sure water condensation has not occurred. If condensation has occurred, remove the disc and leave the unit on for at least one hour.
What to do if there is no picture on my Teac LCD TV, or the picture moves up and down?
If there is no picture on your Teac LCD TV screen, or if the picture moves up and down, first make sure all connections are correct. Also, verify that the unit is in the correct video mode.
Why doesn't the remote control work on my Teac LCD TV?
If the remote control for your Teac LCD TV does not work, ensure there are no obstructions between the remote and the unit. Also, make sure the remote is pointing at the unit and that the battery is installed correctly and is not too weak.
What to do if my Teac LCD TV does not continue to play discs or plays the same section repeatedly?
If your Teac LCD TV does not continue to play discs or plays the same section repeatedly, first ensure the disc is not dirty or damaged. Additionally, make sure the unit is not in any repeat status.
How to fix no display on Teac LCD TV?
If there is no display on the screen of your Teac LCD TV, make sure the unit is turned on and all connections are correct.
To Next Page
General
