Teac LCDV3253HD - Page 36

DVD REMOTE CONTROL OPERATION
-30-
2:0-9 keys
These keys are used to input the time, as well as title, chapter
and track numbers.
When a numeric item is displayed on the screen, press the 0-9
keys to select the desired entry, and press ENTER to confirm.
When a numeric item is larger than 9 press the GOTO key to
select the display entry.
During DVD, playback, press MENU to return to the program menu.
Note:This function is subject to the disc.
5:DVD MENU
4:UP/DOWN/LEFT/RIGHT
Used to navigate menus.
9:DVD SETUP
Press SETUP during playback to enter DVD SETUP OSD
Press SETUP toagain resume DVD playback
10:REPEAT
Pressing <REPEAT> to select Repeat Title, Repeat . Chapter,
Repeat off during DVD playback.
Pressing <REPEAT> to select Repeat Single, Repeat All and
Repeat off(CD or Others).
11:PLAY/
PAUSE
Press PLAY/PAUSE during playback to pause playback.
Press PLAY/PAUSE to resume normal playback.
Press PLAY/PAUSE from stop mode to start play.
12:STOP
Press STOP once during playback to stop and hold playback.
Press PLAY to resume playback from the point you pressed STOP.
Press STOP twice to stop playback completely.