Teac LP-R400 - Listening to a Record 1; Turntable Setup for Playback; Placing and Starting a Record

15
ENGLISH
Listening to a Record 1
< Before use, completely loosen the transportation screw by
turning them clockwise with a coin and remove the stylus
guard.
Press the PHONO/AUX button once or twice to select
PHONO.
1
Select the speed.
4
Put the record on the turntable.
When playing a 45 RPM record, use the included adaptor.
3
Gently push the clamper to the right to release the tone
arm.
5
Raise the cue lever to lift the tone arm off the tone arm
support.
6
tone arm
cue lever
clamper
1
2
4
5
3
6
Gently open the dust cover.
Be careful not to pinch your finger.
2
transportation screw
adaptor